Z-Wave Plus Micro Controller and Lamp Module – Single Channel Trailing Edge Dimmer


Enjoy the convenience of adding your unique lighting to your Z-Wave mesh network.  Perfect for making smart cabinet lighting or updating the Leg Lamp you use every Christmas.  Remotely control On/Off and dimming of incandescent, halogen, and LED bulbs.

SKU: ZW-4001 Category:


Z-WAVE PLUS – The latest Z-Wave Plus protocol which is the premier wireless, low power and secure mesh network for home automation

DEEP DIMMING CONTROL – True 0 to 100 adjustable dimming.  This unit comes with an adjustable minimum brightness function to guard against flicker at extremely low power levels.  This allows you to predefine the lower dimming threshold so your bulbs are never under powered and can achieve the lowest brightness possible.

TRAILING EDGE – Best for LED’s, the trailing edge design has an advantage over traditional TRIAC or leading edge dimmers as they offer smoother control, soft start and silent running when in operation.  The ZW-4001 is also perfect for controlling and dimming incandescent and halogen bulbs.  An excellent choice for adding phase cut dimming to your lighting projects

SAFE AND RELIABLE – Fully isolated 110V design with emergency shutoff.  When the internal temperature reaches an unsafe level, the ZW-4001 will send an emergency shutoff command to the gateway.

MAXIMUM LOADS – This is an end point device and not intended to operate an entire circuit.    200W maximum resistive load (incandescent) or 100W maximum capacitive load (LED).  Not designed for use with inductive loads such as motors or transformers.

PUSH SWITCH CONTROL – Use the push switch connection to physically control on and off in addition to your smart home control.

REPEATER – The ZW-4001 is also a Z-Wave Plus network repeater.

5 YEAR WARRANTY – Industry leading 5 year warranty.

WORKS WITH – RGBgenie Z-wave touch panels, Vera, SmartThings and most other Z-Wave certified gateways.

You may also like…